## Add the affected inventory

1. On the **Issues** page, open the issue.
2. Open the **Parts** tab.
3. Under **Problem Part**, click **Add Parts** and choose the affected part inventory.
4. Repeat for each additional affected part.

## Set the resolution inventory

1. On the issue’s **Parts** tab, under **Resolution Part**, click **Add Part**.
2. Choose the part inventory used to resolve the issue.

## Remove inventory from an issue

On the issue’s **Parts** tab, click the remove control on the inventory you want to take off the issue. This works under both **Problem Part** and **Resolution Part**. Removing inventory is blocked while the issue is read-only: when it’s **Pending** with approvals configured, when it’s **In Review**, and when it’s **Resolved**.