Serial and lot tracking - ION Manual
A part’s tracking type
A part’s tracking type (serial, lot, or untracked) is set through the Tracking field on the part. For what each type means and how to choose, see Parts. This page covers how each type behaves downstream, how serial and lot numbers are generated, and the rules for switching a part’s tracking type.
What each tracking type changes downstream
| Surface | Serial | Lot | Untracked |
|---|---|---|---|
| Receiving | Each unit gets a serial; ION generates labels per unit. | Receive against a lot number; one label per lot. | Receive a count; no per-unit identifier. |
| Inventory | One inventory row per unit. | One inventory row per location and lot. | One inventory row per location, with quantity. |
| BOM install | Operator scans the specific serial being installed. | Operator scans the lot; quantity counts down. | Operator confirms count. |
| Run history | Per-unit history: scan the serial to see every run it touched. | Per-lot history, with a lot-level rollup. | Aggregate counts only. |
| Issues | Issues can attach to a specific serialized unit. | Issues attach to a lot. | Issues attach to a part inventory row at a location. |
| Traceability report | Full chain of custody per unit. | Lot-level genealogy. | Quantity-level only. |
Serial number generation
When a part is serial-tracked, ION generates serial numbers in one of two ways:
- Automatically from the part’s revision scheme, recommended for in-house manufactured parts.
- From the supplier at receive time, for purchased serialized components. Scan or enter the vendor’s serial.
Serial numbers are unique within the org. ION rejects a duplicate serial scan during install or receive, which protects against a common operator error.
Lot number generation
Lot numbers come from one of three sources:
- Generated by ION at receive time using a configured pattern.
- Entered from the supplier’s lot label.
- Captured from your manufacturing batch identifier when you produce a lot internally.
Lots are scoped to the part. LOT-2026-0123 on part A is different from LOT-2026-0123 on part B.
Switch tracking type
Switching tracking type after inventory exists is constrained:
- Serial to Lot or Untracked is blocked while serialized inventory rows exist. Consume or archive every serial unit first.
- Lot to Serial or Untracked is blocked while lot-tracked inventory rows exist.
- Untracked to Serial or Lot is allowed, but existing untracked inventory stays untracked. New receipts use the new tracking type.
Made on Assembly and tracking
When a serialized sub-assembly is installed onto a parent assembly through Made on Assembly (see Editing build requirements), ION still tracks the sub-assembly’s serial. The Made on Assembly flag changes the workflow, so the sub-assembly is built into the parent rather than as a separate run, but it doesn’t change the identity. The serial trail is preserved.
Every serial scan is an operator action. If your downstream traceability doesn’t need per-unit identity, lot tracking is faster on the floor and is a reasonable middle ground. To catch inventory drift early, schedule cycle counts through inventory adjustments.